Prices shown exclude VAT and may vary depending on finishing options.
Sticker Printing
Stickers available in a wide range of materials and shapes. Choose from art paper, Yupo (waterproof), clear (waterproof), matte silver (waterproof), kraft, and more — all available in various shapes.
Photo Sticker
Custom stickers made from your own photos — pets, kids, and more. Available in small quantities.
For high-contrast prints, gloss coated paper's smooth surface delivers sharp, vivid color contrast. Its high whiteness reproduces CMYK full color precisely — best for photo printing and detailed color designs.
Matte coating cuts down glare for a calm, refined impression. It preserves the texture of premium stock while resisting fingerprints.
Circle cut removes hard corners so round logos and character designs blend naturally into the shape.
About Gloss Coated Paper 90g
Art paper for Gang-Run stickers. The most basic sticker material with vivid printing quality.
Best For
Standard labels, product stickers
Circle Kiss-Cut
Circle-shaped kiss-cut stickers. Easy to peel from the backing sheet.
Finishing Options
Matte Coating — A calm matte texture that conveys a premium feel. No reflections for excellent readability, creating a refined and sophisticated atmosphere.
You can view detailed coating options on the order page.
Foil — Gold foil on a smooth coated-paper sticker catches the light cleanly even on a small label. Once it's on a product on the shelf, it becomes the first thing the eye lands on among all the other labels.
Spot UV (Epoxy) — Coating the whole sticker in matte and reserving gloss for only the logo or illustration lets matte and shine coexist on a single label. As fingers peel or touch it, the raised gloss concentrates within that small surface.
Die Line SizeThe size when the sticker is peeled off. The die line must be created as a stroke (not a fill).
Safety ZoneKeep at least 2mm (0.08 inch) inside the die line on all sides.
Trim SizeThe size that is trimmed larger than the die line.
Extend the design 3mm (0.12 inch) beyond the trim size.
Tip. Use "Exact-Size Cut" to adjust the distance between the die line and trim size.
(See "Cutting Guide" below for details.)
Use "Custom Size" to enter your desired size.
Keep at least 2mm (0.08 inch) between the die line and safety zone.
Keep at least 3mm (0.12 inch) between the bleed and die line. More bleed is always better. More is better than less.
ExampleOrder Sticker Die Line Size: 60 × 60mm
Keep at least 3mm (0.12 inch) bleed beyond the die line on all sides.
→ Bleed area: 66×66mm (2.60×2.60 inch)
→ Safety zone: 56×56mm (2.20×2.20 inch) (2mm margin per side)
▲ Do not work at 1:1 with the die line. Keep at least 3mm (0.12 inch) margin inside and outside the die line. You may extend more on the outside.
Multiple Die Lines
Order Size (Die Line Size)
Result
▲ Enter the total die line size covering all die lines. Refer to the orange line in the image above.
▲ Minimum distance between die lines must be at least 5mm (0.20 inch).
▲ If there is a background color, extend it at least 2.5mm (0.10 inch) beyond the die line on each side.
▲ When submitting files, separate the print layer and die line layer (use layers or artboards). Match print and die line positions at 1:1 scale.
White Ink Printing Setup
4-Color (CMYK) PrintingWhite Ink PrintingCMYK + White Ink
▲ The white ink area should be 0.2mm (0.01 inch) smaller than the CMYK area, created at K100%.
▲ If CMYK and white ink areas are 1:1, registration shift may cause slight white ink overflow.
▲ Separate the CMYK and white ink layers. Submit in order: CMYK first, then white ink.
You can find more detailed guides on coating, finishing, and other options on the order page.
