Food Packaging Label Gloss Coated Paper 90g Circle Kiss-Cut Vivid Gloss Coating Sticker Printing

Starting from ₩ 14,300 / 1000sheets

Paper Stock: Gloss Coated Paper 90g
Cutting: Circle Kiss-Cut
Printing: Single-sided Printing
Size: 60 x 40 mm

Price by Quantity

Quantity	Unit Price	Total
500sheets	₩ 28	₩ 13,970
1,000sheets	₩ 14	₩ 14,300
2,000sheets	₩ 13	₩ 26,950
5,000sheets	₩ 13	₩ 64,680
10,000sheets	₩ 13	₩ 126,610

Prices shown exclude VAT and may vary depending on finishing options.

Sticker Printing

Stickers available in a wide range of materials and shapes. Choose from art paper, Yupo (waterproof), clear (waterproof), matte silver (waterproof), kraft, and more — all available in various shapes.

Food Packaging Label

Custom labels for food packaging. Synthetic materials resistant to frozen and refrigerated storage conditions.

For food labels, gloss coated paper's smooth surface prints product information sharply and clearly. It's the most common choice for everyday food boxes and packaging labels.

Gloss coating brings out vivid, punchy colors that grab attention. Its smooth sheen makes photos and color-rich designs look crisp and sharp.

Circle cut removes hard corners so round logos and character designs blend naturally into the shape.

About Gloss Coated Paper 90g

Art paper for Gang-Run stickers. The most basic sticker material with vivid printing quality.

Best For: Standard labels, product stickers

Circle Kiss-Cut

Circle-shaped kiss-cut stickers. Easy to peel from the backing sheet.

Finishing Options

Gloss Coating — A glossy coating that delivers vivid colors and dynamic print quality. Especially effective for photos and full-color designs, creating strong visual impact.

Vivid colors, brilliant gloss, dynamic printing

You can view detailed coating options on the order page.

Foil — Gold foil on a smooth coated-paper sticker catches the light cleanly even on a small label. Once it's on a product on the shelf, it becomes the first thing the eye lands on among all the other labels.

Spot UV (Epoxy) — Coating the whole sticker in matte and reserving gloss for only the logo or illustration lets matte and shine coexist on a single label. As fingers peel or touch it, the raised gloss concentrates within that small surface.

Finishing available upon request

Foil Embossing Spot UV Thermography Scoring Punch Die-Cut

For sealed food packaging only. Not intended for direct food contact use.

How to Prepare Your Files

Safety Zone Die Line Size Trim Size

Die Line Size The size when the sticker is peeled off. The die line must be created as a stroke (not a fill).

Safety Zone Keep at least 2mm (0.08 inch) inside the die line on all sides.

Trim Size The size that is trimmed larger than the die line.

Extend the design 3mm (0.12 inch) beyond the trim size.

Tip. Use "Exact-Size Cut" to adjust the distance between the die line and trim size.
(See "Cutting Guide" below for details.)
Use "Custom Size" to enter your desired size.

Keep at least 2mm (0.08 inch) between the die line and safety zone.

Keep at least 3mm (0.12 inch) between the bleed and die line.
More bleed is always better.
More is better than less.

Example Order Sticker Die Line Size: 60 × 60mm

Keep at least 3mm (0.12 inch) bleed beyond the die line on all sides.

→ Bleed area: 66×66mm (2.60×2.60 inch)

→ Safety zone: 56×56mm (2.20×2.20 inch) (2mm margin per side)

▲ Do not work at 1:1 with the die line. Keep at least 3mm (0.12 inch) margin inside and outside the die line. You may extend more on the outside.

Multiple Die Lines

Order Size (Die Line Size)

Result

▲ Enter the total die line size covering all die lines. Refer to the orange line in the image above.

▲ Minimum distance between die lines must be at least 5mm (0.20 inch).

▲ If there is a background color, extend it at least 2.5mm (0.10 inch) beyond the die line on each side.

▲ When submitting files, separate the print layer and die line layer (use layers or artboards). Match print and die line positions at 1:1 scale.

White Ink Printing Setup

4-Color (CMYK) Printing White Ink Printing CMYK + White Ink

▲ The white ink area should be 0.2mm (0.01 inch) smaller than the CMYK area, created at K100%.
▲ If CMYK and white ink areas are 1:1, registration shift may cause slight white ink overflow.
▲ Separate the CMYK and white ink layers. Submit in order: CMYK first, then white ink.

You can find more detailed guides on coating, finishing, and other options on the order page.

Go to Order Page →

Other Finishes

Uncoated Matte Coating

Other Paper Stocks

Gloss Coated Paper 90g - Extra Strong Gloss Coated Paper 90g - Removable Clear Film 25g Matte Silver Film 25g

Other Uses

Thank You Sticker Packaging Sticker Logo Sticker Fragile Fragile (Handle with Care) Jar Label Cosmetic Label Wedding Favor Sticker

Go to Order Page →

Offset Printing

Premium Digital (Indigo)

Offset Printing

Premium Digital (Indigo)

Offset Printing

Large Format

Offset Printing

Imprinted

Offset Printing

Premium Digital (Indigo)

Offset Printing

Goods

Large Format

Accessories

Food Packaging Label Gloss Coated Paper 90g Circle Kiss-Cut Vivid Gloss Coating Sticker Printing

Price by Quantity

Sticker Printing

Food Packaging Label

About Gloss Coated Paper 90g

Circle Kiss-Cut

Finishing Options

How to Prepare Your Files

Other Finishes

Other Paper Stocks

Other Uses

FORPLI